ZHEJIANG LANXI HAIJU INTELLIGENT EQUIPMENT CO.,LTD
LANXI HAIDE MACHINE TOOL CO.,LTD
Copyrights@2018 ZHEJIANG LANXI HAIJU INTELLIGENT EQUIPMENT CO.,LTD All right 浙ICP备2022013188号-1 Powered by www.300.cn
宁海龙华模具塑胶有限公司
Copyrights@2018 宁海龙华模具塑胶有限公司 版权所有 浙ICP备12041941号 网站建设:中企动力 宁波
PRODUCTS CENTER
Page view:
HNC-40 Horizontal inclined rail CNC lathe
No.:
HNC-40
Product description
The machine tool is designed by using the finite element method, and the overall layout and key structure of the machine tool are analyzed and calculated theoretically through advanced software, so as to improve the rigidity of the machine tool, reduce the thermal deformation, reduce the temperature rise and vibration frequency of the spindle, and thus overcome the shortcomings of the rigidity of the main parts of the conventional lathe.Advanced structure design and perfect process measures ensure that the machine tool has high machining accuracy and long-term accuracy maintenance, the machine tool machining accuracy can reach it5-it6 level.The surface roughness is up to ra0.8um - ra1.6um.
The HNC40 is more compact than similar machine tools, giving it more internal operating space and allowing it to process larger parts.Increased the scope of application of machine tools, so that customers get the maximum benefits.
Machine tool lathe bed tilted 45 °, possesses the advantages of oblique lathe bed smooth chip removal.
Adopt full seal protection, good waterproof effect, good agreeableness, easy to operate.
|
Unit | Size | |
Maximum bed diameter | mm | Ф400 | |
Maximum slalom diameter on board | mm | Ф250 | |
Maximum turning length | mm | 450 | |
Type and code of spindle end | A2-6 | ||
Diameter of main shaft hole | mm | Ф62 | |
Maximum through rod diameter | mm | Ф45 | |
Range of spindle speed | R/min | 50-3000 | |
Rated output torque of spindle | Nm | 72 | |
Number of spindle speeds | Electrodeless | ||
Main motor output power | 30 min rating | KW | 15 |
Continuous rating | KW | 11 | |
Power chuck diameter | inch | 10" | |
X Fast moving speed | m/min | 12 | |
Z Fast moving speed | m/min | 15 | |
X servo motor torque | Nm | 7.5 | |
Z servo motor torque | Nm | 7.5 | |
X trip | mm | 220 | |
Z trip | mm | 490 | |
Guide form | Rolling guide | ||
Tool post form | 8 station servo knife tower | ||
Tool dimension | External circular knife | mm | 25 x 25 |
Boring blade diameter | mm | 40 | |
Chip remover type | Chain slat type | ||
Machine weight | Gross Weight | kg | 2800 |
Machine tool appearance | L x W x H | mm | 2610 x 1930 x 1800 |
General power | Voltage | V | AC380 |
Scope range of the fluctuation of voltage | -10~+10%(Note 1) | ||
Frequency | Hz | 50±1 |
Note 1:CNC machine tools have strict requirements for power supply.If the user power grid fluctuations more than 10%, must increase the voltage regulator, otherwise the CNC machine will not work properly, or even unpredictable results.
Previous article
HNC-36A(oblique) conjoined bed/power head type
CNC-40 Numerically Controlled Lathe
Next article